Machine Guards

Machine Safety Guards

Machine Guards

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Add to Hire
Contact Us
Operators Manual
All Downloads
Operators Manual
All Downloads
Recommended PPE

Machine Guards keep pedestrians away from moving pipe on threading equipment.

Additional Information

Machine Safety Guards

Designed To Keep Pedestrians Away From Moving Pipe On A Threading Machine

Standard Equipment: 1 X Safety Guard, Or Set Of Barriers ( Coloured Red )

Related Products

Hire
Hilmor 16 - 25mm Conduit Bender

Hilmor 16 - 25mm Conduit Bender

Conduit installation times are decimated and waste is significantly reduced.

View Product
Add to Hire
Hire
4 Inch Axxair Cutter C/W Bench

4 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

View Product
Add to Hire
Hire
Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

View Product
Add to Hire
Hire
Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

Ridgid 258 Hydraulic/Powered Pipe Cutter 2 1/2 Inch to 8 Inch

The RIDGID Model 258 Power Pipe Cutter cuts 2 1/2 Inch (65 mm) to 8 Inch (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. Powered by the RIDGID No. 700 Power Drive (110v) or Ridgid 760 FXP Power Drive (60v cordless) , the 258 is a displacement cutter that provides square cuts.

View Product
Add to Hire
Hire
Ridgid Stud Cutter 8MM

Ridgid Stud Cutter 8MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

View Product
Add to quote
Add to Quote
Hire
Freeze Master 110v 15 - 42mm

Freeze Master 110v 15 - 42mm

Suitable for domestic and light industrial use the 420D has freeze heads
to fit pipes from 15mm to 42mm.

View Product
Add to quote
Add to Quote
Hire
Petrol Water Test Pump Max. 1500PSI / 100BAR

Petrol Water Test Pump Max. 1500PSI / 100BAR

228-petrol-water-test-pump-max-100-bar

This Hilta Petrol Water Test Pump is has a fuel Tank capacity 3.6 Ltrs and can reach a maximum pressure of 1500psi / 100bar.

View Product
Add to quote
Add to Quote
Hire
Ridgid 690 1/2 Inch to 2 Inch 110v Threader

Ridgid 690 1/2 Inch to 2 Inch 110v Threader

Ridgid 690 110v Threader for In -Situ Threading.

View Product
Add to quote
Add to Quote
Hire
Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

Ridgid 300C Threading Machine 1/2 Inch to 2 Inch BSP c/w Pipe Support

A versatile and lightweight machine that can extend its threading ability up to 6 Inch by using either a 141 or 161 geared threader.

View Product
Add to quote
Add to Quote
Hire
Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

View Product
Add to quote
Add to Quote
Hire
Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

View Product
Add to quote
Add to Quote
Hire
Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Ridgid 141 Receeder 2 1/2 Inch to 4 Inch

Upgrades Ridgid 300 to 2 1/2 Inch – 4 Inch.

View Product
Add to quote
Add to Quote
Back to Pipe Threading Machines
Back to All Hire Equipment
Over 30 YearsExperience & Knowledge
Fast ShippingAcross UK Mainland
Wide & ExtensiveSelection of Tools