Pipe Threading Machines

Nipple Chuck

Ridgid Nipple Chuck

Ridgid

Nipple Chuck

Holds short or close nipples for threading.

Operators Manual

Operators Manual

Recommended PPE

Holds short or close nipples for threading.

More Information

Features

Holds short or close nipples for threading.
For use with 300 Power Drive, 300 Compact, 535 and 1822 (with adapter kit) and 1224 Threading Machines.

,

Related Products

Hire

12 Inch Pulling Tool

12 Inch Pulling Tool

With the pulling tool no blocks, chains or machinery are needed and all operations can be carried out by one man. Simply place the tool on the pipes and pull them together.

Hire

ND-54 Tube End Notcher

ND-54 Tube End Notcher

ND-54 Tube End Notcher is used for cutting and dimpling the branched tube ends to enable the best possible flow characteristics. This is an accessory to the T60 T-Drill.

Hire

GF Cut & Bevel Machine RA4 1/2 Inch to 4 Inch C/W Bench

GF Cut & Bevel Machine RA4 1/2 Inch to 4 Inch C/W Bench

The GF Cut and Bevel Machine offers many advantages including multiple point clamping, fast adjustment of dimensions and regulated cutting speed.

Hire

Freeze Master 110v 8 - 61mm

Freeze Master 110v 8 - 61mm

The 690E is made to make building maintenance easy. Fitted with two high capacity freeze heads it is ideal for the engineer who needs to tackle the larger industrial and commercial pipe sizes.

Rems Solar Push K60

Rems Solar Push K60

Self-suction centrifugal pump, suitable for different transport media, e.g. heat transfer liquids, antifreeze, water, aqueous solutions, emulsions. With proven, powerful condenser motor, quiet running, 860 W, on/off switch.

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Ridgid 154 4 Inch Copper Cutters

Ridgid 154 4 Inch Copper Cutters

Quick-Acting Tubing Cutters.

Manual T Drill for Copper 15 - 42mm

Manual T Drill for Copper 15 - 42mm

Ridgid 161 Receeder 4 Inch to 6 Inch

Ridgid 161 Receeder 4 Inch to 6 Inch

Increases capacity of 2 Inch or 3 Inch threader to 4 Inch.

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP c/w Pipe Support

Ridgid 1233 Threading Machine 1/2 Inch to 3 Inch BSP C/W Die Heads and Pipe Support.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Ridgid Additional Die Head

Ridgid Additional Die Head

Additional Die Head.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools