Pipe Threading Machines

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ridgid 46 Pipe Support

Ridgid

Ridgid 46 Pipe Support

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Operators Manual

Operators Manual

Recommended PPE

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Additional Information

Features:

Adjustable Pipe support
Ideal for use with threading machines, roll grooving, or other pipe working applications

,

Related Products

Hire

Ridgid Stud Cutter 8MM

Ridgid Stud Cutter 8MM

The 1390 Threaded Rod Cutter is designed to cut threaded rods used to hang pipes for air conditioning, sprinkler installations and other lightweight frames from the ceiling. Makes clean cuts without damaging thread.

Hire

Drain Bungs 1 Inch to 6 Inch

Drain Bungs 1 Inch to 6 Inch

Drain Bungs isolate and seal sections of drain during testing or repair.

Hire

8 Inch Axxair Cutter C/W Bench

8 Inch Axxair Cutter C/W Bench

The Axxair cutter offers cutting without tube deformation and is ideal for thin wall stainless tubes and pipes. It provides a cut of quality geometry leaving a good surface condition.

Hire

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

Ridgid 918 Hydraulic Groover Supplied 8 Inch to 12 Inch

The RIDGID Model 918 Hydraulic Roll Groover features a powerful 15-ton hydraulic ram in a compact, easy to transport unit. With one man set-up and operation, the 918 is the ideal groover for job site requirements.

Tubela 15-54mm Ratchet Assisted Copper Bender

Tubela 15-54mm Ratchet Assisted Copper Bender

For all your tube bending requirements for copper, stainless steel, aluminium, conduit, mild steel tube. Not suitable for use with Litex tube. Litex tube will split and crack if bending is attempted.

Ridgid 1400 Workbench C/W Chain Vice and Engineers Vice

Ridgid 1400 Workbench C/W Chain Vice and Engineers Vice

This heavy-duty workbench from Ridgid has a tough wood working surface which has been specially treated to resist water and dust.

Expansion Kit 65 - 88mm

Expansion Kit 65 - 88mm

This kit adapts 61mm machines to freeze 2½" - 3" ID Steel pipes (76mm & 88mm OD).

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

7.5 CFM Compressor 115 PS1 C/W Hose and 1/2 Inch BSP Bush

High output with compact dimensions makes this tough piston compressor especially handy for on-site tasks involving fixing, spraying, inflating and dust / debris blowing.

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support

Ridgid 1233C Threading Machine 1/2 Inch to 3 Inch NPT c/w Pipe Support.

Nipple Chuck

Holds short or close nipples for threading.

Ridgid 965/RJ98 Pipe Support/Pipe Roller 4 Inch to 12 Inch

Ideal for use with threading machines, roll grooving, or other pipe working applications.

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine 1/2 Inch to 4 Inch BSP c/w Pipe Support

Rex Threading Machine N100A.

Back to Pipe Threading Machines

Back to All Hire Equipment

Over 30 YearsExperience & Knowledge

Fast ShippingAcross UK Mainland

Wide & ExtensiveSelection of Tools